Questions tagged [boundary-conditions]

For questions regarding the choice and/or appropriateness of conditions necessary to model a particular phenomenon with a partial differential equations.

102 questions with no upvoted or accepted answers
Filter by
Sorted by
Tagged with
8
votes
0answers
564 views

Numerical implementation of the Dirichlet-to-Neumann map

I am solving the Dirichlet problem $$ \begin{cases} \Delta u = 0, \\ u|_{\partial D} = f, \end{cases} $$ in a $2d$ domain $D$ using the finite element method. What I want to get is the ...
6
votes
0answers
528 views

Understanding Boundary Condition in FEM

I am trying to understand Dirichlet and Neumann boundary conditions in FEM and I wanted to know if my inference is correct. To articulate my understanding, lets consider a simple case of TE and TM ...
6
votes
0answers
133 views

Do practice and theory differ substantially when implementing Neumann Boundary Conditions using a Mixed Method?

I have implemented a pretty straightforward finite element solver for the following Poisson equation. For the purposes of this question we can assume the source term and the Dirichlet data both ...
5
votes
0answers
248 views

Boundary conditions in the Finite Element Method at only one side of computational domain

I want to solve a Sturm-Liouville problem in 1D, i.e., \begin{align} [p(x)\ u'(x)]'+q(x)u(x) = f(x) \end{align} with boundary conditions \begin{align} u(0)=a \hspace{1cm} u'(0)=b \end{align} How do I ...
5
votes
0answers
161 views

Elliptical problem with Robin BC

Working in finite differences, I am using a transformation on the temperature variable $\Theta = \int_{T0}^T \kappa(T)dT$ to linearize the steady-state heat equation into a Poisson equation $-\...
5
votes
0answers
85 views

Interface Formulation at Finite Volume Boundaries when using the Dual Mesh

When using the dual mesh (vertex-centered) for finite volume methods, you end up with a cell center at the boundaries between materials. It is possible that the equations being solved in each ...
4
votes
0answers
165 views

How to apply an integrated constrain condition in FEM?

I'm running some simulation using FEM. In my model I need to apply a constraint condition to the governing equation. My governing equation similar to the diffusion equation as below: $$\frac{\...
4
votes
0answers
866 views

How to implement boundary conditions on Finite Difference WENO5 scheme for the Euler equations

I'm implementing a Finite Difference WENO5 with Lax-Friedrich flux splitting on a uniform, structured grid to solve the 2D Euler equations of fluid dynamics on a rectangular domain in cartesian ...
4
votes
0answers
68 views

Differential eigenproblem with eigenvalue in boundary condition

Statement of the problem I need to (numerically) solve an eigenproblem of the type $$-\omega^2\mathcal{D}_1\vec{x}=\mathcal{D}_2\vec{x}$$ on the interval $[-1,1]$, where $\mathcal{D}_1$ and $\...
4
votes
0answers
203 views

Reflecting boundary condition posed as a Riemann problem

I am trying to implement a solver for the Euler/Navier Stokes equations. I have a problem implementing boundary conditions for the wall. I am using an unstructured solver. A lot of literature says ...
4
votes
0answers
980 views

2D wave equation with Mur boundary condition - setting up the RHS and solving (time-steps)

I am trying to solve a 2D wave equation implicitly using FD with central approximations with the following boundary conditions $$\begin{align} &u=2\sin\left(\frac{2\pi}{5}t\right)\quad \text{at }...
3
votes
0answers
143 views

Non-reflecting boundary conditions for compressible Navier-Stokes equations

I have some questions about the implementation of non-reflecting OUTFLOW boundary condition for Navier Stokes equations. Following Poinsot, Lele "Boundary Conditions for Direct Simulations of ...
3
votes
0answers
438 views

Neumann-Neumann boundary intersection

I am trying to solve a Vertex Centered, Finite Difference, Poisson equation $-\nabla^{2}u=f$ with Dirichlet boundaries on the left and bottom and Neumann boundaries on the top and right using ...
3
votes
0answers
179 views

Multigrid for Robin boundary conditions

I have a question regarding the treatment of Robin boundary conditions in a multigrid solver. I am solving the Poisson equation in $\Omega=(0,1)^2$ with Robin boundary conditions on the boundary, $$- \...
3
votes
0answers
431 views

Boundary equations for constant right hand side in Poisson equation (FD)

I am setting up to solve a 2D Poisson equation $\nabla^2u = T$ by the finite difference method. I am using the multigrid method. On the coarsest mesh, where the grid size is 2x2, I want to set up ...
3
votes
0answers
68 views

Absorbing BC's / PML on a graph

The wave equation, $$\ddot{u} = c^2 \Delta u,$$ can be generalized to abstract graphs by using the negative graph Laplacian in place of the physical Laplacian. Is there a graph-theoretic analog of ...
3
votes
0answers
55 views

Discretizing boundary conditions for vortex methods

I am working on a fluid simulation using vortex methods. For this I must compute the vortex sheet on my boundaries given as: $$ \gamma(\mathbf{x}) - \frac{1}{\pi}\int_S \frac{\partial}{\partial\mathbf{...
3
votes
0answers
359 views

Transport Equation in a Tube: Source Term on Boundary

I'm modeling mass transport in a flow reactor. The flow reactor is a tube, which allows me to use cylindrical symmetry in solving the Convection-Diffusion-Reaction (CDR) Equation, which governs the ...
2
votes
1answer
90 views

Methodology Suggestion for Wave-propagation Problem using Finite Elements

I want to simulate the propagation of a sinusoidal plane wave in a rectangular domain using Finite Elements Method. First, the wave should propagate through a fluid medium, then it will encounter a ...
2
votes
0answers
81 views

Residual of Poisson equation with periodic boundaries

I am trying to write a multigrid solver for Poisson's equation, $-\Delta u=f$, on the unit square, $\Omega=(0,1)^2$ with periodic boundaries. My primary source has been Multigrid by Trottenberg, ...
2
votes
0answers
39 views

How to account for a corner node with zero-flux condition at an extrapolated distance

I am trying to implement a numerical solver and am having troubles dealing with boundary conditions, especially in the corners. I have a 2D mesh, and on the left I have a Dirichlet condition, on the ...
2
votes
0answers
113 views

CFD and finite volume method: Dirichlet boundary conditions for the Euler equations

Please point me to an answer if one already exists, but after some searching, I still can't find the answer to what seems like a very simple question. There are plenty of references out there for ...
2
votes
0answers
148 views

Implementation of boundary conditions for 1D Euler equations

I'm trying to solve 1D Euler equations with gravity in spherical coordinates using a finite-difference TVD MacCormack method on a non-uniform grid of $N$ components, following the method provided in ...
2
votes
0answers
60 views

Unusual boundary conditions on Matlab

I'm trying to solve the following PDE by Matlab, $$ u_t-\Delta u = 0, \quad \text{in}\quad \Omega\times (0,T) \tag{1} $$ $$ u_t-\Delta_\Gamma u + \partial_\nu u=0,\quad \text{on}\quad \Gamma\times(0,...
2
votes
0answers
151 views

Are there known accuracy issues between 2D axisymmetric and 3D solutions?

In my full 3D solutions I am solving for the potential throughout a $100\times 200\times 200$ grid. Inside is a ring electrode set to -5V via a Dirichlet boundary condition, and surrounded on all ...
2
votes
0answers
112 views

Neumann boundary conditions in the Maccormack scheme

I am trying to solve the viscous Burger equation $$ \frac{\partial u}{\partial t} + u\frac{\partial u}{\partial x} = \mu \frac{\partial^2 u}{\partial x^2} $$ with Neumann boundary conditions. I am ...
2
votes
0answers
50 views

Finite difference Neumann boundary conditions: uneven weighting of edge nodes?

Originally asked this on math.stackexchange, but I figure it's also appropriate here. I'm reading through some finite difference code for a diffusion equation and came across something odd for the ...
2
votes
0answers
72 views

Finite differenced eigenvalue prob. of inhomogeneous boundary conditions?

I am basically asking about eigenvalue problems of differential equations using some finite difference method (FDM). Usually the system is subject to some boundary conditions (BC), e.g., Dirichlet or ...
2
votes
0answers
38 views

Can I expect reasonable results when expanding in scaled Legendre polynomials?

Imagine I want to compute the eigenvalues of an operator $\hat O$ defined on $ L^2(\mathbb{R})$, however using a properly scaled N-dimensional polynomial basis of $ L^2([-a,a]) $ which fulfills ...
2
votes
0answers
32 views

Minimum box size in order for an object in the center to not 'see' duplications of itself under periodic boundary conditions?

I am working on developing a Dissipative Particle Dynamics (DPD) model of a colloid in a bulk fluid. I essentially want to ensure that the perturbations of my meshed colloid are completely uncoupled ...
2
votes
0answers
198 views

Outflow boundary condition - second derivative of velocity

Consider a fluid flow simulation in a pipe. At the outflow, instead of explicitly imposing a boundary condition, I linearly extrapolate information from the interior (for velocity components). This ...
2
votes
0answers
1k views

Center of mass in systems with periodic boundary conditions

I have a question about the calculation of center of mass (COM) in systems with periodic boundary conditions. There is a method introduced here: https://en.wikipedia.org/wiki/Center_of_mass#...
2
votes
0answers
118 views

Finite difference aproximation - Darcy law

I am solving following problem: Filtration of water can be described in bi-dimensional case by $$- \partial_x(K(x,y) \partial_x u ) - \partial_y (K(x,y) \partial_y u ) = 0, $$ where $u$ - water ...
2
votes
0answers
399 views

Solving constrained BVP, singular Jacobian

The boundary value problem is $$ \begin{cases} \dot{x}_i = \begin{cases} (0.5D^{-1}\psi)_i, \text{ if }(0.5D^{-1}\psi)_i \le 0 \\ 0 \text{, otherwise} \end{cases} \\ \dot{\psi} = 2\Sigma x \\ x(0) =...
2
votes
0answers
288 views

Implementation of no-slip boundary conditions in lattice Boltzmann method fluid simulation

My faculty advisor recommended that I take a look at the lattice Boltzmann method as an introduction to scientific computing and potentially an undergraduate honors thesis topic. I cooked up a some ...
2
votes
0answers
131 views

Arbitrary Choosing of the Solution Domain - Navier Stokes and Manufactured Solutions

I want to verify a finite-volume solver (SIMPLE-Algorithm) for the incompressible Navier-Stokes equations by using a manufactured solution. I use Dirichlet boundary conditions for the velocity at all ...
2
votes
0answers
268 views

Treatment of Neumann (Traction) boundary conditions using projection methods

I am looking to solve the incompressible Navier-Stokes equations in 3D, using an inflow boundary condition specifying a velocity: $\mathbf{u} = \mathbf{g}_0 \,\, \forall \,\, \mathbf{x} \in \Gamma_u$ ...
2
votes
0answers
173 views

boundary conditions with non-constant coefficients in cell centred finite volume method

Suppose am solving the heat conduction equation in 1d with Dirichlet boundary conditions. The thermal conductivity $k$ is a non constant function. So $-(k(x)u'(x))' = f(x)$ The value of $k$ enters the ...
2
votes
0answers
74 views

Finite Difference for Hamilton Jacobi Belman

I have hjb equation where $V=V(x,t)$ and $u=u(x,t)$ $V_t + \sup(u) [A(x,u)V_x + B(x,u)V_{xx}]=0$ for $x$ in $[0,1]$ and $t$ in $[0,1]$ I have been able to successfuly resolve it numerically having ...
2
votes
0answers
959 views

Newton Iteration method convergence

I wrote a Python code which solves a second degree nonlinear differential equation using the Newton iteration method. The code converges to a 2-cycle within 50 or so iterations. The cycle only ...
1
vote
0answers
35 views

Discretization formula for a system of two differential equations. “Solution to one of these is the initial condition of the other”. In which sense?

Consider the following stochastic differential equation \begin{equation} dy=\left(A-\left(A+B\right)y\right)dt+C\sqrt{y\left(1-y\right)}dW\tag{1} \end{equation} where $A$, $B$ and $C$ are parameters ...
1
vote
0answers
37 views

Euler Explict Method for solving the PDE for option prices under the Schwartz mean reverting model. Numerical Finance

I have to solve the following PDE for a Call option : $\partial_tV + \{ \alpha - (\mu - \lambda/ \alpha -log(S))\}S\partial_SV + 1/2 \sigma^{2}S^{2}\partial_{S}^{2}V - rV = 0$ Where V(S,t) is the ...
1
vote
0answers
35 views

Effect of reducing flux consistency order at boundary on convergence order

Consider the 1D nonstationary convection-diffusion PDE $$ \begin{alignat}{2} \partial_t u &= -a \partial_x u + D \partial_{xx}u, &\qquad x \in (0,1), t \in (0,T), \\ f(t) &= \left.\left( a ...
1
vote
0answers
76 views

Linearize non-linear PDE with BCs to hyperbolic problem: How does linearization affect BCs?

I am working with the Shallow Water equations that is a system of non-linear PDEs that simulate water waves propagation on some domain, in my cases the $x$-axis. I have here a GIF showing the results (...
1
vote
0answers
67 views

Incorporating radiation boundary condition at the edge in finite difference

I am trying to solve the 2-d heat equation on a rectangle using finite difference method. I am confused as to how to incorporate non linear radiation boundary condition at the edge. $-k\frac{\partial ...
1
vote
0answers
36 views

How to avoid density getting “deleted” in two way rigid body coupling with LBM CFD?

I've been reading this paper recently, which talks about using Lattice Boltzmann methods and two way coupling. Specifically, it outlines fluid solid coupling, and solid fluid coupling, and how simply ...
1
vote
0answers
58 views

Solving a system of PDEs with no-flux boundary conditions (finite difference discretization)

I am interested in solving a system of linear PDEs with the finite difference method and I'm having trouble to solve the no-flux boundary condition correctly. \begin{align} \frac{\partial n}{\partial ...
1
vote
0answers
63 views

Solving diffusion equation using finite difference method

I am solving an 1-dimensional diffusion equation with Neumann boundary condition at outlet and constant concentration, C, at the inlet. In the end, I want to observe how the concentration diffuses ...
1
vote
0answers
91 views

FDM discretization of equation on the boundary

In order to simulate the following equation using FDM $$u_t(t,x)-u_{xx}(t,x)=0, \quad (t,x) \in (0,1)\times (0,1)$$ $$(u_t(t,x)-u_{x}(t,x))\rvert_{x=0}=0, \quad t \in (0,1)$$ $$(u_t(t,x)+u_{x}(t,x))\...
1
vote
0answers
37 views

Boundary conditions for a Non-linear Schrödinger equation using an extended crank nicolson scheme

I try to solve numerically the following PDE for $E(r, z)$ with a cylindrical symmetrie (i. e. $E(r, z) = E(-r, z)$). $\frac{\partial E}{\partial z} = \frac{i}{2k} \Delta E + \mathcal{N}(E)$ Where $...