Questions tagged [grid]

The tag has no usage guidance.

Filter by
Sorted by
Tagged with
0
votes
0answers
19 views

Grid Independence Study

Is the change in time step necessary for the grid independent study? As the CFL is based on the relation between dt and dx. In mesh independent study, only change should be mesh i.e, dx isn't it so?
0
votes
0answers
15 views

A way to generate unit lattices from a honeycomb structure

I am looking to make certain computations on the vertices of periodic cubic honeycombs and quasiregular honeycombs like tetrahedral-octahedral honeycomb. Cubic are simple enough and amount to generate ...
3
votes
0answers
59 views

What is the reason for this finite-difference high errors on non-uniform grid?

tl;dr Using a Taylor-matched method to find coefficients for the discretized equation $ \mathbf{A} \vec{f}'' = \mathbf{B} \vec{f} $, a Fortran code has been implemented to find the second derivative ...
0
votes
1answer
79 views

Is it possible to resample grid in such a way so that continuous objects remain continuous?

Suppose I rasterize a rectangle of width 2.5 gridpoints and get the values as shown: =============== | 0 | 1 | 1 | 0.5 | 0 | Now I resample that ...
1
vote
0answers
23 views

Solution errors when refining a static grid: Continuous vs. step-wise refinement

Let's assume I am working on a 2-D domain on $R^2$, with my coordinates $x \in[-1,1]$, $y \in[-1,1]$ and I want to solve a popular CFD problem, like the shallow water system or the Euler system. At $x=...
0
votes
0answers
33 views

Grids for atmosphere simulation with finite volumes on the globe

I am currently in the early construction process of building a simple CFD model of a rotating planetary atmosphere. The planet should be allowed to tilt significantly, so that a time-dependent source ...
0
votes
1answer
107 views

Good C, C++ library for efficient grid search / tuples, ideally with bindings to Eigen

I have a $q$-dimensional grid, known at run, not compile-time, that has $50$ points in each direction and hence $50^3$ combinations that I would like to first build and then call a function with each ...
1
vote
0answers
17 views

Translating grid with extrusion speed

I am putting into MATLAB code the equations that describe a plastic extrusion process. From a paper, I found I should use a spatial grid that translates with the extrusion speed, being the reference ...
3
votes
0answers
108 views

WENO5 scheme in a staggered grid

I'm trying to use the finite-difference WENO scheme to solve the 2D density conservation law with axial symmetry (coordinates $r,z$): $\frac{\partial \rho}{\partial t}+\nabla \cdot (\rho \vec{v}) = \...
1
vote
1answer
199 views

Mapping derivative information in uniform to non-uniform grid

I'm having two sets of grids. One is uniform and another one is not uniform. I will calculate the derivative in uniform grid points and I like to transfer(map) the derivative to the non-uniform grid ...
1
vote
1answer
91 views

Grid dependence of a numerical model

Statement of the problem Suppose, we consider the following model $$ \begin{array}{l} (1)~\mathbf{u}_t + \mathbf{F(u)}_x = \mathbf{S}(\mathbf{u},\mathbf{w}), \\ (2)~\mathbf{w}_x = \mathbf{P}(\mathbf{...
1
vote
2answers
65 views

Access optimized data structure for representing integer lattice

Consider the integer lattice in $2d$, namely the set $\mathbb{Z}^2 = \{(x,y): x,y\in \mathbb{Z}\}$, and let $u:\mathbb{Z}^2 \to \mathbb{R} $ be a function defined on some bounded subset of $\mathbb{Z}^...
2
votes
1answer
1k views

Three dimensional irregular grid data interpolation to regular grid

I have three-dimensional radar reflectivity data obtained as voxels (scans, rays, altitudes). The data has been sampled at irregular spacings and I want to convert this into a regular grid. In ...
0
votes
1answer
35 views

Converting mass density to point mass approximation on a grid

In an nbody gravity simulation, instead of doing exact(all-pair brute force) solution, I added masses of each body into cells of a 3D grid(each cell is just a float value having a mass value). Then ...
1
vote
0answers
102 views

Choice of velocity grid - staggered or not?

I'm trying to understand when and why one would use a staggered vs. a colocated grid in problems that have velocities and scalars that they transport (e.e. density). If scalars are defined cell-...
1
vote
0answers
62 views

adaptive / smart grid choice for dynamic programming

I've a read a paper about investing where they used a dynamic programming approach to solve a finite horizon problem, i.e. $$\max_{x_t} E[u(W_T)] $$ where $u$ is a utility function and $W_T$ ...
1
vote
2answers
153 views

Grid mapping from Tchebyshev

I am using Tchebyshev discretization to solve a system of PDEs. Usually, I map the Tchebyshev space($\xi$, from -1 to 1) to physical space ($x$, from 0 to L) using $$x = (\xi +1)*L/2$$ Now, I also ...
2
votes
2answers
63 views

Efficient Representation of (spatially sparse) spatial time series

Background I have a huge dataset consisting of points (on a plane) together with a timestamp for each point. This is a collection of car GPS measures, giving us the location (latitude/longitude) of ...
0
votes
1answer
49 views

Balancing core load when number of particles in cells vary (PIC on GPU)

Consider this basic scheme for particle in cell simulations ( with just short-range interactions ): assign particles to disjunct cells for cell $A$ go over neighboring cells $B$ for each particle $...
1
vote
1answer
318 views

Finite Volume Polar Discretization: Lengths

Given a uniform polar grid, as in the figure below: and a FV discretization of a gradient for example: $\frac{\partial p}{\partial \varphi} = 0$ $\Delta r \frac{p_e - p_w}{\Delta \varphi} = 0$ My ...
5
votes
0answers
158 views

How to optimally choose points for multivariable Hermite interpolation?

I have a multi-variate, continuous function $f$ from $R^n$ to $R$, which I can query for its output for any input. I would like to create interpolation polynomial for it. In one-dimensional case ...
0
votes
2answers
647 views

Finite Difference Grid Spacing and Scaling

I have been exploring finite differences and heat transfer using the 2D heat equation to further expand my knowledge. So far I think it is going well. I am running into some confusion around grid ...
1
vote
1answer
2k views

Is there an advantage of using a staggered grid over a regular one when combined with high order methods?

The title says is all. This question is in the contest of an incompressible Navier-Stokes solver. Specifically, I am currently working on a new solver while referring myself to an older code for ...
0
votes
1answer
635 views

Interpolation of velocities on staggered grid (in PIC)

Edit: (copying from my comment) Let's consider the inverse problem when I need to transfer velocities from particles to the grid (inverse bilinear interpolation). How'd I transfer a particle's x-...
1
vote
0answers
141 views

C1 continuous spline on regular 2D-grid with quadratic 1D cuts

I want some scalar spline function defined on regular 2D grid $F(x,y)$ with continuous first derivative which is easy to intersect with arbitrary ray/line ${\vec l}(t) = (c_x t,c_y t,c_z t)$. ...
3
votes
1answer
123 views

Alternative to messy grid node indexing within multiple layers of loops

Recently,I dive into a set of somehow ancient Fortran codes and try to fully understand them. A large fraction of these codes are multiple layers of loops over many state variable dimensions, which ...
1
vote
1answer
452 views

3-dimensional plotting with nonuniform grids

I have 3 variables I am considering: time (t), 1-dimensional space (x), and intensity (I). I would like to plot the intensity in the z-axis as a function of t and x (the latter two variables would ...
2
votes
1answer
2k views

Contour plot interpolation recommendation

I am not sure if my question is on topic or not and if not please let me know. I have regularly spaced gridded data(output of a weather forecast simulation software) and I have latitude and ...
1
vote
0answers
125 views

Finding boundary intersection points with Cartesian grid?

I would like to find the intersection points e.g. $M_x$ and $M_y$ as in the attached figure. The boundary (solid line) is defined by the Lagrangian points. I am working in C++ (basic - medium ...
1
vote
1answer
84 views

Common nodes in two FEM grids

There are two independent tetrahedral FEM grids. Second grid is subset of the first. By subset, I mean: nodes from the second grid are exactly in the same positions as some nodes from the first grid. ...
3
votes
1answer
839 views

Generating a non-uniform grid

I am interested in generating a 1D non-uniform grid on the interval [0, L] with N points, where a region of width $\sigma$ and ...
0
votes
1answer
921 views

Quadtree type Grid

I would like to code for a quadtree type meshing but don't know how to do. If anyone can help or can share any starting code?
10
votes
5answers
8k views

Dynamically ending ODE integration in SciPy

I have a light ray moving through space-time, i.e. a curve in $\mathbb{R}^4$, parametrized by some variable λ. The exact trajectory, i.e. the coordinate functions $x^μ(λ)$ of the curve are given by ...
0
votes
1answer
59 views

Should I use bestman2 or dcache CLIs (srmping, srmls, etc..)

I am fairly new to using SRM, and I am wondering if I should be using srm CLI tools (srmping, srmls, srmcp, etc..) provided by dcache, or bestman2 counter parts (srm-ping, srm-ls). I used to think ...
1
vote
1answer
251 views

How to compute the weight matrix for tomography applications?

I am trying to compute the weight matrix for a set of straight ray paths through a reconstruction region. Ideally, I would like to be able to do this for both a rectangular grid region, where each ...
2
votes
1answer
34 views

How can I discover / access various SE (storage elements) in GlideinWMS environment?

I am submitting jobs to Open Science Grid from a glidein-wms enabled submit hosts such as osg-xsede. I'd like to stage some data on SE nearest to osg-xsede submit host, then distribute data to various ...
4
votes
1answer
2k views

Python: Grid with step control ODE solver

I have a problem in physics formulated via an ODE. Now I like to solve it numerically using Pythons scipy.integrate and the therein complex_ode. I figured out how and it works but now I like to ...
1
vote
1answer
290 views

Ray tracer : create an uniform grid [closed]

I wrote a simple ray tracer, and now I try to implement an uniform grid. There is a lot of documentation on how to traverse the grid, but I don't know how to construct the grid. I have my uniform ...
1
vote
1answer
138 views

How to convert a Matrix to a DistMatrix in Elemental?

I have a Matrix<double> on a single core, the result of doing an MPI_Reduce. I want to do the Cholesky, so I need to ...
0
votes
1answer
51 views

Cells segregation

There is unstructured grid which contains only quadrangles cells. Each cell has 4 neighbors, and known them (has a pointer to them). I can iterate through all cells in the grid. Some cells are marked ...