Questions tagged [ode]

Ordinary Differential Equations (ODEs) contain functions of only one independent variable, and one or more of their derivatives with respect to that variable. This tag is intended for questions on modeling phenomena with ODEs, solving ODEs, and other related aspects.

78 questions with no upvoted or accepted answers
Filter by
Sorted by
Tagged with
1
vote
0answers
88 views

Time dependent self-consistent equations

I am facing the following problem. I need to solve numerically a set of coupled equations $$i\frac{d}{dt}f_{n}^{(i)}(t) = \left[U\cdot n(n-1) + \mu\cdot n\right]f_{n}^{(i)}(t) - \sqrt{n+1}\Phi_i^{*}\...
1
vote
0answers
54 views

should boundary conditions be effecting moving mesh results?

I have a question on the use of moving mesh to solve the inviscid euler equations. I have solved the following equations: $$\frac{\partial}{\partial t}\left[\begin{array}{c} \rho\\ \rho u \end{array}\...
1
vote
0answers
48 views

Can variational formulations be solved using series solutions?

What I specifically mean is, given some functional $F\left[\mathbf{x}\right]$ which is stationary with respect to $\dot{\mathbf{x}}=f(\mathbf{x})$ and some boundary or initial conditions, can one ...
1
vote
0answers
2k views

How to solve an ode with stochastic time-dependent input

I am trying to repeat an example I found in a paper. I have to solve this ODE: $25 \ddot{x} + 15 \dot{x} + 330000 x = p(t)$ where $p(t)$ is a white noise sequence band-limited into the 10-25 Hz ...
1
vote
0answers
86 views

Increase convergence of non-linear equations resulting from ODEs

I am trying to solve a set of couple ODEs: $V_l(r) - r W_l(r) - f1(r) W_l' = 0\tag 1$ $r^2 h''_l(r) + f2 r h_l'(r) + f3 h_l(r) - f4 U_l(r) = 0 \tag 2$ $\kappa (U_l + h_l) + V_{l+1} + W_{l+1} = 0\...
1
vote
0answers
232 views

Block Backward Differentiation Formula (BBDF), on order 4 formula

I am trying to implement a program the numerical method to solve ODE called Block BDF as explained in this article: https://waset.org/journals/waset/v38/v38-49.pdf As it is variable step-size, I need ...
1
vote
0answers
30 views

Combining trend estimation and constrained Marquart fit

This title certainly needs some clarification: I need to compute parameters $a_i$ for a helper function $f(\vec{a};k)$ (for grid interpolation) which is fitted to a number of values $y_k$ which are ...
1
vote
0answers
254 views

Memory allocation error with GSL ODE solver applied to system of 4 ODEs

I am trying to solve a (large) system of ODEs with GSL solvers. When I use driver method I get an error message of could not allocate space for gsl_interp_accel, ...
0
votes
0answers
63 views

Why is my numerical solution to a set of ODEs infinite?

I am trying to solve the following linear PDEs $$\frac{\partial u_x}{\partial x}=-[i\omega b_{||}+\nabla_\perp u_\perp],$$ $$\frac{\partial b_{||}}{\partial x}=-\frac{i}{\omega}\mathcal{L}u_x,$$ $$\...
0
votes
0answers
26 views

Simulating the response of nonlinear system with stiff differential equations

I want to simulate the response of a nonlinear system given in the following form: $$ \dot{x_1} = f_1(\bar{x_1})+g_1(\bar{x_1})x_2, \ x_1(0) = 0.2 $$ $$ \dot{x_2} = f_2(\bar{x_2})+g_2(\bar{x_2})x_3, \...
0
votes
0answers
31 views

Scipy.integrate.odeint is returning curves with almost the same frequency for different damping ratios, shouldn't they be different?

I am trying to solve the ODE for a harmonic oscillator using Scipy's odeint solver for different dampening factors. I'm using the following code, based off of this example: ...
0
votes
0answers
22 views

More efficient way of solving for transfer function between boundaries of wave equation

I am considering the wave equation with position varying material properties $$ m(x) \frac{\partial^2 u}{\partial t^2} = \frac{\partial}{\partial x}\left(k(x) \frac{\partial u}{\partial x}\right), \...
0
votes
0answers
67 views

Solving a non-linear BVP using Finite Differences method

Edit: I have updated my question using the feedback in the comments. I have a boundary value problem that I need to solve using finite difference. My task is specifically to solve it using finite ...
0
votes
0answers
33 views

Solving nonlinear pendulum using Runge-Kutta 4 for smaller steps

I am trying to solve nonlinear pendulum using 4th order Runge-Kutta method for limits between a=0.0 to b=110 seconds and simulated the results to observe the pendulum movement. But when I increase the ...
0
votes
0answers
33 views

Can't plot correctly precession of perihelion of Mercury in MATLAB using ode45 or ode23

I was trying to plot precession of perihelion of Mercury using matlab. For this I am following a book Computational Physics by Nicholas J. Giordano and Hisao Nakanishi 2nd Edition. In that book ...
0
votes
0answers
31 views

solving electron motion in undulator by Boris method

I am trying to use Boris scheme to solve the electron trajectory in undulator. The undulator field I used is: $$B_x = b_0\sin(2\pi \tfrac{z}{\lambda_u})$$ where $b_0 = \dfrac{2\pi c_{0}K}{q m_{e} \...
0
votes
0answers
33 views

Solutions in Ngspice do not converge to right value

I recently noticed while using Ngspice that the solution converges to a deviated value if the number of iterations per unit period for a square wave is less than 100, i.e. if I am using a square wave ...
0
votes
0answers
55 views

A non linear ode with boundary conditions at infinity

I want to solve the non-linear ODE $$\frac{d^2}{dx^2}y=a(y+y^3)$$ With the boundary conditions that $$\lim_{x\to \pm \infty} y(x) =0$$ I am not aware of any analytical method for solving this kind ...
0
votes
0answers
51 views

Computing Trajectory Equations of Kerr Geodesics

I want to numerically solve the trajectory equations of a Kerr geodesic given by wikipedia in Matlab. The trajectories look like: I implemented the equations and solved it with the standard Runge-...
0
votes
0answers
28 views

Finding the polynomial for the solution of an ODE

I’m stuck trying to solve part (b) and (c) of the below problem, but part (b) is the one of main concern here as I think (c) should follow easily once (b) is completed. I don’t know where to start ...
0
votes
0answers
41 views

Time sampling changes solution

I'm currently trying to solve a problem using numerical methods. The set-up is rather long, so I apologize in advance... TL;DR: My solutions change depending on how big my steps are and I don't know ...
0
votes
1answer
145 views

Prescribing variables as an excitation in Runge-Kutta method

I am using Runge-Kutta to solve a $3 \times 3$ 2nd order linear ODE $$M x'' + C x' + K x = 0$$ and initial conditions are all zeros. Then I prescribe the 2nd variable to follow a given path. As for ...
0
votes
0answers
94 views

nonlinear boundary condition

I have a nonlinear system of algebraic equations with a nonlinear boundary condition of the form \begin{equation} f'''(x,t) - (f'(x,t))^3 - \alpha(t) f'(x,t) = 0, \end{equation} at $x =0$, where $\...
0
votes
0answers
131 views

system of coupled nonlinear ODEs with complex coefficients

I am interested in numerically solving the following system of coupled ODEs $$\left(i-\frac{1}{2\Omega}f_{m,n}\right) \frac{d a_{m,n}(t)}{dt} =E_{m,n}^{\text{kin}}(t) + \left(\omega_{0}+V_{m,n}-\frac{...
0
votes
0answers
62 views

Quick scheme for separable first-order ODE

I'm trying to integrate an incredibly simple ODE: $$ y'(x) = -f(y),\quad y(0) = y_0 \ , $$ from $x=0$ to $x=1$. This is a decay type of equation, $f$ is the (variable) decay rate and $y$ is the ...
0
votes
0answers
57 views

Energy anomolies in many body simulation

I am trying to simulate the gravitational interaction between many bodies. I am using a direct PP force calculation and a 4th order symplectic integrator with a variable step size. The energy of ...
-1
votes
1answer
596 views

Dirichlet boundary condition

I am trying to solve ODEs in matlab using ode15s. Instead of specifying ODEs in the format M * dC/dt = f(C,t) where C is a function of x and t. I want ...
-2
votes
1answer
317 views

Solving electron density function for Hydrogen and drawing in 3D

I recently stumbled upon interesting site that has interactive 3D representation of radial electron distribution (atomic orbital). here is the url: http://winter.group.shef.ac.uk/orbitron/AOs/1s/e-...

1
2